用户 Maker(@ MakerDAO) 的最新消息

The Maker Governance votes to set new parameters for the StarkNet Maker Teleport implementation:
• Fee parameter from 0 to 1 basis point.
• Deposit limit from 50 to 1000 DAI.
🗳 https://vote.makerdao.com/poll... https://t.co/oGTRXSTc4Y

Maker Governance 投票为 StarkNet Maker Teleport 实施设置新参数:
• 费用参数从 0 到 1 个基点。
• 存款限额从 50 到 1000 DAI。
🗳 发表时间:3年前 作者:Maker @MakerDAO详情

As a set of forward guidance commitments on future changes, the proposal recommended that ETH-A, ETH-B, ETH-C, WBTC-A, WBTC-B, WBTC-C, WSTETH-A, and WSTETH-B Stability Fees should not increase through October 31.

作为对未来变化的一组前瞻性指导承诺,该提案建议 ETH-A、ETH-B、ETH-C、WBTC-A、WBTC-B、WBTC-C、WSTETH-A 和 WSTETH-B 稳定费应在 10 月 31 日之前不会增加。

发表时间:3年前 作者:Maker @MakerDAO详情

WSTETH-B Stability Fee has been set at 0% as per the latest Executive Vote.
This is part of a set of parameter changes proposed by the MakerDAO Open Market Committee.
https://twitter.com/MakerDaiBo...

⚠️Maker Protocol Changes ⚠️ (1/2)
ETH-B Stability Fee: 4% → 3.75%
WSTETH-A Stability Fee: 2.5% → 2.25%
WSTETH-B Stability Fee: 0.75% → 0%
WBTC-B Stability Fee: 4% → 3.75%
GUNIV3DAIUSDC1-A Stability Fee: 0.01% → 0.02%

发表时间:3年前 作者:Maker DAI Bot @MakerDaiBot

根据最新的执行投票,WSTETH-B 稳定费已设定为 0%。
这是 MakerDAO 公开市场委员会提出的一组参数更改的一部分。

⚠️Maker 协议变更⚠️ (1/2)
ETH-B 稳定费:4% → 3.75%
WSTETH-A 稳定费:2.5% → 2.25%
WSTETH-B 稳定费:0.75% → 0%
WBTC-B 稳定费:4% → 3.75%
GUNIV3DAIUSDC1-A 稳定费:0.01% → 0.02%

发表时间:3年前 作者:Maker @MakerDAO详情

In the same way, one comment, from any member of the community, does not indicate how the wider community will vote.
Maker Governance is composed of many participants and voting power is distributed over 21 Recognized Delegates and additional Shadow Delegates.
6/ https://t.co/xol6gFhY3Q

同样,来自社区任何成员的一条评论并不表明更广泛的社区将如何投票。
Maker 治理由许多参与者组成,投票权分配给 21 名认可代表和其他影子代表。
6/ https://t.co/xol6gFhY3Q

发表时间:3年前 作者:Maker @MakerDAO详情

Ideas come from every community participant, from different perspectives.
But, only ideas that are formalized through the respective Governance process and approved by MKR holders are guaranteed to be implemented.
5/

想法来自每个社区参与者,来自不同的角度。
但是,只有通过各自的治理流程正式化并得到 MKR 持有者批准的想法才能保证得到实施。
5/

发表时间:3年前 作者:Maker @MakerDAO详情

The discussion channels mentioned above are open to all community participants who wish to participate in the discussion.
This is something that has been happening since the beginning of Maker Governance several years ago.
4/

上述讨论渠道对所有希望参与讨论的社区参与者开放。
这是自 Maker Governance 几年前开始以来一直在发生的事情。
4/

发表时间:3年前 作者:Maker @MakerDAO详情

The Maker Protocol will run as it is running now without interruption or substantial changes that have not passed the respective Governance process.
3/

Maker 协议将按照现在的方式运行,不会出现中断或未通过相应治理流程的重大更改。
3/

发表时间:3年前 作者:Maker @MakerDAO详情

In the Maker Protocol, the implementation of a specific idea is not guaranteed until it is formalized through the respective Governance process and approved by MKR holders.
2/

在 Maker 协议中,在通过各自的治理流程正式化并获得 MKR 持有者批准之前,不能保证特定想法的实施。
2/

发表时间:3年前 作者:Maker @MakerDAO详情

All the official implementations behind the Maker Protocol are always being posted here.
The discussios on the Maker Forum, the MakerDAO Discord, or other open channels are means of interaction between MakerDAO and the public. These discussions are not official statements.
1/

Maker 协议背后的所有官方实现总是在这里发布。
Maker 论坛、MakerDAO Discord 或其他开放渠道上的讨论是 MakerDAO 与公众互动的方式。这些讨论不是官方声明。
1/

发表时间:3年前 作者:Maker @MakerDAO详情

📄 RWA-009 Legal Agreement Update
The legal agreements for the RWA-009 deal will be amended.
Note this item has been inserted in the place of the next 25 million DAI Drawdown for RWA-009.
Future drawdowns will be postponed until a new trading partner steps in.
9/

📄 RWA-009 法律协议更新
RWA-009 交易的法律协议将被修改。
请注意,此项目已插入 RWA-009 的下一个 2500 万 DAI 提取位置。
未来的提款将被推迟,直到有新的贸易伙伴介入。
9/

发表时间:3年前 作者:Maker @MakerDAO详情

💸 Recognized Delegate Compensation
As per MIP61: Recognized Delegate Compensation, a total of 121,808 DAI will be distributed to 14 Recognized Delegates if this executive proposal passes.
8/

💸 认可的代表报酬
根据 MIP61:认可代表补偿,如果该执行提案获得通过,总共将向 14 名认可代表分配 121,808 DAI。
8/

发表时间:3年前 作者:Maker @MakerDAO详情

The ownership has now been verified.
The final permission to SocGen's wallet which will allow them to drawdown DAI will be granted, if this executive proposal passes.
7/

所有权现已得到验证。
如果该执行提案获得通过,将授予 SocGen 钱包的最终许可,允许他们提取 DAI。
7/

发表时间:3年前 作者:Maker @MakerDAO详情

🏦 Activate SocGen Vault
The SocGenForge OFH token was onboarded on August 2, 2022.
However, due to the key holders being unavailable during the spell creation and validation, the ownership of the operator wallet could not be verified.
6/

🏦 激活 SocGen Vault
SocGenForge OFH 代币于 2022 年 8 月 2 日上线。
但是,由于密钥持有者在拼写创建和验证期间不可用,因此无法验证运营商钱包的所有权。
6/

发表时间:3年前 作者:Maker @MakerDAO详情

↗️ Maximum Debt Ceiling (line) Increases.
• GUNIV3DAIUSDC1-A Maximum Debt Ceiling from 750 million DAI to 1 billion DAI.
• GUNIV3DAIUSDC2-A Maximum Debt Ceiling from 1 billion DAI to 1.25 billion DAI.
• MANA-A Maximum Debt Ceiling from 15 million DAI to 17 million DAI.
5/

↗️ 最大债务上限(线)增加。
• GUNIV3DAIUSDC1-A 最高债务上限从 7.5 亿 DAI 提高到 10 亿 DAI。
• GUNIV3DAIUSDC2-A 最高债务上限从 10 亿 DAI 到 12.5 亿 DAI。
• MANA-A 最高债务上限从 1500 万 DAI 提高到 1700 万 DAI。
5/

发表时间:3年前 作者:Maker @MakerDAO详情

↗️ Stability Fee Increases.
• GUNIV3DAIUSDC1-A Stability Fee from 0.01% to 0.02%.
• GUNIV3DAIUSDC2-A Stability Fee from 0.05% to 0.06%.
• UNIV2DAIUSDC-A Stability Fee from 0.01% to 0.02%.
4/

↗️ 稳定费增加。
• GUNIV3DAIUSDC1-A 稳定费从 0.01% 到 0.02%。
• GUNIV3DAIUSDC2-A 稳定费从 0.05% 到 0.06%。
• UNIV2DAIUSDC-A 稳定费从 0.01% 到 0.02%。
4/

发表时间:3年前 作者:Maker @MakerDAO详情

↘️ Stability Fee Reductions.
• ETH-B Stability Fee from 4% to 3.75%.
• WSTETH-A Stability Fee from 2.50% to 2.25%.
• WSTETH-B Stability Fee from 0.75% to 0%.
• WBTC-B Stability Fee from 4.00% to 3.75%.
3/

↘️ 稳定费减免。
• ETH-B 稳定费从 4% 降至 3.75%。
• WSTETH-A 稳定费从 2.50% 到 2.25%。
• WSTETH-B 稳定费从 0.75% 降至 0%。
• WBTC-B 稳定费从 4.00% 到 3.75%。
3/

发表时间:3年前 作者:Maker @MakerDAO详情

📊 MOMC Parameter Changes
As per the latest MakerDAO Open Market Committee proposal, the following parameter changes will be made if this executive proposal passes.
👇
2/

📊 MOMC 参数变更
根据最新的 MakerDAO 公开市场委员会提案,如果该执行提案通过,将进行以下参数更改。
👇
2/

发表时间:3年前 作者:Maker @MakerDAO详情