Here is your perfect Sunday plan.
What MakerDAO is and how the Maker Protocol works.
The Maker D3M and RWA bull cases.
Briefly recap of the Maker Governance.
By @hexonaut, Protocol Engineering Core Unit team member.
👇 https://twitter.com/defiyield_...

这是你完美的周日计划。
MakerDAO是什么以及Maker协议是如何工作的。
制造商D3M和RWA牛市。
简要回顾创客治理。
协议工程核心单元团队成员@hexonaut。
👇 https://twitter.com/defiyield_...

@Sascha45982463 @shivsakhuja 🤝

@Sascha45982463@shivskakhuja🤝

We celebrate new Governance participants.
From any perspective.
Decentralized Governance is the way. https://twitter.com/mhonkasalo...

我们庆祝新的治理参与者。
从任何角度来看。
分散治理是解决问题的方法。https://twitter.com/mhonkasalo...

We strongly encourage you to follow this Parameter Changes Proposal by reading the original Maker Forum thread:
https://forum.makerdao.com/t/p...
9/

我们强烈建议您阅读原始Maker论坛帖子，遵循此参数更改建议：
https://forum.makerdao.com/t/p...
9号/

The proposal also recommended as a set of forward guidance commitments on future changes that ETH-A, ETH-C, WBTC-A, WBTC-C, WSTETH-A Stability Fees should not increase through August 31
These commitments are non-binding on either the Parameter Changes Proposal or Governance
8/

该提案还建议，ETH-a、ETH-C、WBTC-a、WBTC-C、WSTETH-a稳定费用在8月31日之前不应增加，作为未来变化的一套前瞻性指导承诺
这些承诺对参数变更提案或治理均无约束力
8个/

Reducing the target rate to 2.75% should lead to roughly 25 million DAI generated assuming current supply and borrowing volumes.
Also, reducing debt ceiling will limit tail risk and ensure the D3M stays within the 30% of real DAI supply target.
7/

如果将目标利率降低至2.75%，则假设当前的供应量和借贷量，将产生大约2500万DAI。
此外，降低债务上限将限制尾部风险，并确保D3M保持在实际DAI供应目标的30%以内。
7/

5️⃣ Aave D3M: Reduce bar to 2.75% and reduce debt ceiling to 100 million DAI
The Aave D3M has entirely unwound, as borrowing rates fell below Maker’s target rate (bar) of 3.5%.
👇
6/

5.️⃣ Aave D3M：将bar降低至2.75%，并将债务上限降低至1亿DAI
Aave D3M已经完全放开，因为借贷利率低于制造商3.5%的目标利率（bar）。
👇
6/

4️⃣ MANA-A: Increase Max. Debt Ceiling to 15 million DAI
The 10m ceiling was filled in the last month.
Risk is limited as vaults have debt weighted collateralization ratio of 650%, but on-chain slippage of MANA is poor.
The proposal, therefore, suggests a 5m increase.
5/

4.️⃣ MANA-A：将最大债务上限提高至1500万DAI
上个月，10米的天花板被填满了。
风险是有限的，因为金库的债务加权抵押率为650%，但MANA的链上滑动很差。
因此，该提案建议增加500万英镑。
5/

3️⃣ WSTETH-B: Increase gap to 30 million DAI
The proposal highlights that increasing the gap makes it easier for users to open vaults or migrate vaults to WSTETH-B
With the current pressure on stETH, Maker would encourage usage of the higher collateralization vault option
4/

3.️⃣ WSTETH-B：将差距增加到3000万DAI
该提案强调，增加间隙可以让用户更容易地打开Vault或将Vault迁移到WSTETH-B
鉴于目前对stETH的压力，该公司将鼓励使用更高担保的保险库选项
4/

2️⃣ WSTETH-A: Reduce Max. Debt Ceiling to 200 million DAI
The proposal argues that stETH has recently faced significant market stress.
While Maker has good protection against stETH losing peg, it is still prudent to limit exposure until liquidity conditions improve.
3/

2.️⃣ WSTETH-A：将最大债务上限降低至2亿DAI
该提案认为，stETH最近面临着巨大的市场压力。
虽然该公司对失去联系汇率制有很好的保护，但在流动性状况改善之前限制风险敞口仍是谨慎之举。
3/

1️⃣ LINK-A: Reduce Max. Debt Ceiling to 50 million DAI
According to the post, LINK has faced declining liquidity and volumes, which weighs on risk metrics.
This ceiling reduction should lower the risk of this collateral while its current utilization is still below 50m DAI
2/

1.️⃣ 链接A：将最大债务上限降低至5000万DAI
据《邮报》报道，LINK面临着流动性和交易量的下降，这对风险指标产生了影响。
在当前使用率仍低于5000万DAI的情况下，该上限的降低应能降低该抵押品的风险
2/

The MakerDAO Open Market Committee published a new Parameter Changes Proposal.
This proposal is composed of different parameter changes for various Maker Vaults based on market conditions and their potential implications for Maker.
Here are the highlights:
🧵
1/

MakerDAO公开市场委员会发布了一项新的参数变更提案。
本提案包括根据市场条件及其对制造商的潜在影响，对各种制造商保险库进行不同的参数更改。
以下是亮点：
🧵
1个/

@ETHGlobal Shout out to @ETHGlobal for organizing this great experience and thanks to all participants 💪
6/

@ETHGlobal向@ETHGlobal致敬，感谢他们组织了这次精彩的体验，并感谢所有参与者💪
6/

@ETHGlobal The second place is for is DEFI Spotlight, built by Ashik Abdul 🥈
On it, Ashik designed a set of dashboards for many DeFi protocols, including Maker — oracle gas fees, outstanding Dai, and unique users are part of these available dashboards.
👇
https://showcase.ethglobal.com...
5/ https://t.co/KwMzrftPdx

@ETHGlobal排名第二的是由ashikabdul建造的is DEFI Spotlight🥈
Ashik在其上为许多DeFi协议设计了一组仪表盘，包括制造商-甲骨文天然气费用、杰出的Dai和唯一用户是这些可用仪表盘的一部分。
👇
https://showcase.ethglobal.com...
5个/https://t.co/KwMzrftPdx

@ETHGlobal ✅ Select the source and destination.
✅ DAI is sent to the Teleport contract and then is burned
✅ Maker Oracles give attestations
✅ Attestations are received, a transaction is submitted to L1, DAI is minted and sent to the user.
👇
https://showcase.ethglobal.com...
4/

@ETHGlobal公司✅ 选择源和目标。
✅ 戴被发送到传送合同，然后被烧死
✅ 创客神谕作证
✅ 收到认证，向L1提交事务，生成DAI并发送给用户。
👇
https://showcase.ethglobal.com...
4/

@ETHGlobal Roshan Palakkal built the DAI Teleporter, an interface built entirely on top of the Maker Teleport SDK.
This UI allows users to perform fast L2 to L1 DAI withdrawals (teleportations 🌌)
And, this project became the first winner of our sponsor grant — 3,500 DAI 🏆
3/ https://t.co/Jiqd5vNNDR

@ETHGlobal Roshan Palakkal构建了DAI Teleporter，该接口完全构建在Maker Teleport SDK之上。
此UI允许用户快速执行L2到L1 DAI提取（远程传输🌌)
而且，该项目成为我们赞助赠款的第一个获胜者-3500 DAI🏆
3个/https://t.co/Jiqd5vNNDR

@ETHGlobal On the eve of the hackathon, the MakerDAO Core Units shared what they would like to see built for Maker.
As a result, a list of great project ideas came out!
This wishlist was shared with hackathon participants for inspiration
The prize pool was 4k DAI
What happened? 🔮
2/

@ETHGlobal在hackathon前夕，MakerDAO核心单元分享了他们希望看到为Maker构建的内容。
结果，一个伟大的项目创意列表出来了！
此愿望列表与hackathon参与者分享，以获得灵感
奖品池是4k DAI
发生了什么事？🔮
2/

We are happy to share with you the outcome of our participation in #HackMoney2022 @ETHGlobal 🤝
Many BUIDLORS delighted the community with unique projects that will add important BUIDLING blocks to the future of finance
Let's see what was built on top of Maker
👇
1/ https://t.co/WzLQrGGIPA

我们很高兴与您分享我们参与#HackMoney2022@ETHGlobal的成果🤝
许多建筑商通过独特的项目为社区带来了欢乐，这些项目将为未来的金融业增添重要的建筑板块
让我们看看在Maker上构建了什么
👇
1个/https://t.co/WzLQrGGIPA

RT: @gelatonetwork was one of the first to join our Decentralized Keeper Network along with our internal team and Keep3r Network.
The idea is to have massive redundancy with all mission critical infrastructure.
Glad to have them backing @MakerDAO. https://twitter.com/gelatonetw...

RT：@gelatonetwork是最早加入我们分散的Keeper网络以及我们的内部团队和Keep3r网络的公司之一。
其想法是在所有关键任务基础设施上实现大规模冗余。
很高兴他们支持@MakerDAO。https://twitter.com/gelatonetw...

@ajithchelsea @Rocket_Pool @stakewise_io @LidoFinance stETH has already been onboarded as collateral in the Maker Protocol.
You can currently generate Dai through the WSTETH-A and WSTETH-B vault types.

@ajithchelsea@Rocket\u Pool@stakewise\u io@LidoFinance stETH已经作为Maker协议的抵押品加入。
当前可以通过WSTETH-A和WSTETH-B vault类型生成Dai。